|
Safety Drum Vents
Drums of flammable liquids require venting
to relieve pressure build-up due to heat and also to prevent creation
of a vacuum when liquid is being drained off or the drum is subjected
to sudden cooling. Either pressure or vacuum can cause failure of the
container. In event of fire, the hazards of drum leakage or explosion
due to excessive pressure build-up can be catastrophic.
|
|
| >> More Info |
|
Safety Drum Funnels
Wide mouth funnels are a must when
transferring liquids into the relatively small 2" bung on a 30- or
55-gallon drum. Justrite offers funnels with superior safety features
that make them ideal for use with solvent, thinner, oil and paint
wastes. Heavy 18-gauge galvanized steel with electrostatically applied
epoxy powder coat paint provides durability and chemical resistance.
All funnels comply with EPA and OSHA regulations and are FM approved.
Larger funnels accept a lock to prevent unauthorized access. Funnels
intended for use with flammables are fitted with a brass flame arrester
that absorbs and dissipates heat, preventing any external ignition
source (like sparks from powertools, static electricity or cigarettes)
from reaching the drum's flammable contents.
|
|
| >> More Info |
|
Tip-Over Protection System for Drum Funnel
Tip-Over Protection System has all
the features of Justrite's No. 08207 safety funnel, with the addition
of a self-closing ball valve and vent adapter. The integral
self-closing ball valve threads into a 2" drum bung and minimizes vapor
emissions as well as preventing spillage if the drum is accidentally
tipped over. This makes it ideal for earthquake-prone areas. The system
includes a separate brass vent adapter which fits into the .75" drum
bung to provide pressure and vacuum relief for protection against drum
rupture or explosion.
|
|
| >> More Info |
|
Safety Fill Vents and Funnels
Safety Fill Vents and Funnels
facilitate waste solvent disposal, while offering protection. Built of
cast brass or high density polyethylene with a 6" flame arrester, they
fit a 2" bung opening. Features include automatic pressure and vacuum
relief and cap with safety chain to prevent misplacement of cap.
High-density polyethylene funnel has full 9" diameter to eliminate
spills.
|
|
| >> More Info |
|
Drum Siphon Adapter
Justrite Drum Siphon Adapter is the
simple solution for nearly complete drainage of liquids out of 30- and
55-gallon drums, eliminating the need for dangerous drum tipping or
rolling. Unique siphon action empties residual solvents from a typical
two to three gallons down to the last few ounces. Made of solid cast
brass, the adapter will hold-up under heavy use with compatible
liquids. One end of the adapter accepts a standard .75" drum faucet and
the opposite end screws into a .75" drum bung opening. An adjustable
collar accommodates bungs in varying positions to maximize siphoned
liquid volume. Not only are you getting the benefit of using nearly all
the drum contents, you won't have to pay the high cost associated with
removal of large volumes of hazardous liquids.
|
|
| >> More Info |
|
Antistatic Wires
Antistatic Wires prevent sparks from
static electricity generated by movement and flow of flammable liquids.
Bonding between containers during liquid transfer, and connecting drums
to an earth ground are required under Federal and Local Codes. Standard
wire lengths are 3' and 10'; for longer reach use several wires with
.25" terminal ends. Custom length bonding and grounding assemblies are
also available as are individual clamps.
|
|
| >> More Info |
|
Drum Fill Gauges
Vertical Drum Polyethylene Pop-up Gauge
is a low cost solution to overfilling drums during waste disposal
operations. When drum is almost full, indicator "pops-up" to warn you.
|
|
| >> More Info |
|
Drum Faucets
Series 08900/08500 Drum Faucets. Justrite self-closing Safety Faucets
incorporate an internal flame arrester which prevents flashback of fire
into the drum. Brass and stainless steel faucets feature a
Polytetrafluoroethylene (PTFE)® seal; zinc faucets have a Buna-N
gasket. Adjustable models screw tightly into drum and can be adjusted
to dispensing position, with spout downward, without thread damage or
leakage. Faucet extensions provide extra dispensing accuracy and
prevents spills.
|
|
| >> More Info |
|
Drum Cradle - Lifter - Wrench
Drum Cradle allows for easy moving
and secure setup of drums weighing up to 800 pounds. Loading bar grips
drum chime and permits smooth shifting of drum into horizontal position.
|
|
| >> More Info |
|
Drip Cans - Spill Tray - Drum Dolly
Spill control accessories are ideal for
placement below drum faucets where spills can create a fire hazard.
Perforated metal fire baffle acts a flame arrester to protect contents
from fire exposure. For repositioning of heavy drums, steel drum dolly
offers easy portability.
|
|
| >> More Info |
